Cultivation

Power Harrow

The universal soil tillage implement with working widths of 3 to 6 m. 

• 3 - 6 m working width 
• 8 to 14 rotors
• Cat III three point linkage
• Heavy duty 8 mm welded trough

Power Harrow

The KE 01 rotary harrow is available in two different versions in working widths of 2.50 to 4 m.

• 2.5 - 4 m working widths 
• 8 - 14 rotors
• Cat III three point linkage
• Heavy duty 6 mm welded trough

Disc Harrow

Catros & Catros+ impress with their high output, working quality and robustness! Working widths from 3 m to 12 m.

• 3 m to 7.5 m working widths 
• Coupling frame - 9 m to 12 m
• Cat II / Cat III 3 point linkage
• 460 - 240 mm scalloped discs 

Compact Disc Harrow

The Catros compact disc harrow is ideally suited to shallow and intensively mixing soil tillage. Thanks to its easy pulling, and working widths from 7 m to 9 m, especially high forward speeds and impressive work rates are possible – and all this extraordinarily economically with a record-breaking low fuel consumption.

• Maintenance-free disc bearings
• Optimised disc setting for a perfect job
• Hydraulic depth adjustment
• ContourFrame for optimum ground contour 
• Individual disc suspension 
  
  

Heavy Compact Disc Harrow

The large Certos TX compact disc harrow is available in working widths of 4, 5, 6 and 7 m. 660 mm diameter discs allow for working depths of up to 20 cm.     

• 4 to 7 m working widths
• Working depths - up to 20 cm
• Cat III lower linkage drawbar
• 660 mm scalloped discs

Tine Cultivator

The Cenius TX in working widths of 4 m, 5 m, 6 m and 7 m for stubble cultivation, mixing soil tillage and top soil deep loosening.

• Working widths - 4 - 7 m
• 11-14 tines
• 8 - 15 km/h operational speed
• Cat III lower linkage

Power Harrow

Deep loosening at cultivation without prior ploughing even in heavy trash conditions. Working width 3 m.

• 3 m working width
• 3 m transport width
• 4 deep loosening legs
• Cat III three point linkage
• Winged tines 30 cm wide

Tine Cultivator

The perfectly suited machine for the fast medium deep to deep soil cultivation and the intensive incorporation of straw residue. Working widths 3.0, 3.5 and 4.0 metres.

• 3 - 4 m working width
• 11 - 14 tines with 3D spring overload protection
• Cat III lower linkage

Disc Cultivator

Carrier is a disc cultivator used for high speed primary tillage and seedbed preparation. The wide range of front tools, discs and packers enables Carrier to handle the versatile challenges of modern farming – from ultra-shallow cultivation to a deeper incorporation. The versatility it brings to the farm saves passes, decreases machine cost per hectare and provides the best start possible for the coming crop.

• Effective working width: 3.94 - 7.94 m
• Transport width: 2.5 m
• Number of discs: 32 - 64
• Power requirement: 120 - 220 hp

Disc Cultivator

Carrier is a disc cultivator used for high speed primary tillage and seedbed preparation. The wide range of front tools, discs and packers enables Carrier to handle the versatile challenges of modern farming – from ultra-shallow cultivation to a deeper incorporation. The versatility it brings to the farm saves passes, decreases machine cost per hectare and provides the best start possible for the coming crop.

• Effective working width: 8.94 - 11.94 m
• Transport width: 3.0 m
• Number of discs: 72 - 98
• Power requirement: 300 - 400 hp

Disc Cultivator

Performing both a full-scale shallow cultivation and deep cultivation in one pass, the VÄDERSTAD TopDown cultivator incorporates four independent working “zones” – intensive cutting and mixing, loosening and mixing, leveling, then full-depth reconsolidation with an adjustable packer.

• Effective working width: 2.65 - 9.10 m
• Transport width: 3.0 - 5.0 m
• Number of tines: 10 - 35
• Power requirement: 150 - 400 hp