1335 ZG-TS

Trailed Spreader

High capacity large area spreader with working widths from 18 to 54 metres, hopper volume of 5,500 and 8,200 litres. With integrated AutoTS border spreading system.

AMAZONE

Trailed Spreader

High capacity large area spreader with working widths from 18 to 54 metres, hopper volume of 5,500 and 8,200 litres. With integrated AutoTS border spreading system.

AMAZONE ZG-TS

Benefits

  • Hopper capacity: 5500 litres and 8200 litres
  • Large filling opening enables the easy filling from a tank or with a loader
  • Steep hopper walls ensure the perfect flow of the spreading material even in hilly terrain
  • The rubber floor belt suffers little wear due to the centralised, automated belt control even under uneven conditions. 

 

undefined   undefined

Chassis – optimum comfort for highest work rates

  • Stable and robust chassis technology, designed for speeds of up to 50 km/h
  • 7.0 t up to 9.8 t payload 
  • up to 9.8 t payload on public roads
  • Oversized tyres reduce the ground pressure and allow operation even under the most difficult of conditions
  • For tyres with an AS profile, track widths of 1.80 to 2.25 m are possible
  • Increased driving comfort from the sprung suspended and height adjustable drawbar systems
  • More safety in road traffic thanks to over-dimensioned axles and brakes (twin-line air braking system or hydraulic braking system)
  • Hydraulically actuated rollup cover
  • Hydraulic brake system or twin-line air braking system, each with parking brake
  • Mud guards (required for 40 km/h version)
  • Large ground clearance
  • Large-dimensioned parking jack
  • Foldable ladder

Well thought through spreading system technology – first class spread results

  •  All the components made from stainless steel are also resistant to heavy abrasion from the fertiliser
  • Agitator, metering components and spreading discs are optimally matched to provide an even fertiliser distribution 
  • High-quality stainless steel joint connections for the hydraulics within the dirt area
  • 8-section part width control is standard:
  • ZG-TS Tronic via spread rate adaptation 
  • ZG-TS Hydro via spread rate and rev. Speed adaptation
  • Maintenance-free and robust oil bath gearbox with integrated overload safety device

Spreading vane sets
TS 1 = 15 m - max. 24 m
TS 2 = 21 m - max. 36 m
TS 3 = 24 m - max. 54 m

Reliable and accurate application of the desired spread rate

The weighing system which can be used for determining the hopper Contents (fill level check) and for monitoring the application rate via the offline weighing procedure, provides the utmost comfort and safety. 

For spreaders without a weighing system a calibration device for carrying out a spread rate check is optionally available. The calibration device includes one measuring bucket and is equipped with a sensor for monitoring the time. The measured values can be processed in the AMATRON 3 (in ISOBUS mode).

AMAZONE
Downloads

Brochures

Technical Data

Images

Video